Food and Drugs Administration, (FDA) Haryana, India. |
Email ID: dahiya19@yahoo.com
- Laboratory Waste Management, Types and Its Disposal - January 28, 2024
- How to Become a Skilled Manufacturing Chemist in the Pharma Industry - January 26, 2024
- Sweet Science: Exploring Importance of Inverted Sugar in Pharma Industry - December 5, 2023
Last Updated on January 3, 2024 by The Health Master
Disintegration test and Dissolution test
The pharmaceutical industry is highly regulated, and drug manufacturers must comply with various standards set by regulatory agencies.
One of the most critical quality control measures is to test the drug’s ability to dissolve and disintegrate in the body. This test ensures that the drug is absorbed correctly in the body and produces the desired effect.
There are two types of tests used to evaluate the quality of drugs: disintegration tests and dissolution tests.
In this article, we will discuss the differences between these two tests and their significance in the pharmaceutical industry.
Also read: Dissolution test: Importance in Pharma Industry
Disintegration Test
The disintegration test measures the time it takes for a drug to break down into small particles in the stomach or intestinal fluids.
This test is necessary because the drug’s ability to break down in the stomach or intestines is critical for its absorption. If a drug does not break down, it cannot be absorbed by the body, and its effectiveness is reduced.
Therefore, the disintegration test is an essential quality control measure to ensure that the drug is of high quality.
The disintegration test is performed using a disintegration apparatus, which consists of a basket-rack assembly and a glass tube.
The basket-rack assembly holds six plastic tubes, each containing a tablet or capsule. The glass tube is filled with simulated gastric or intestinal fluid.
The basket-rack assembly is then immersed in the fluid, and the time it takes for the tablets or capsules to break down is recorded.
The time it takes for the drug to disintegrate should be within the range specified in the in the Indian Pharmacopoeia (IP), British Pharmacopoeia (BP), United State Pharmacopoeia (USP), etc., against the monographs of the particular dosage form.
Dissolution Test
The dissolution test measures the amount of drug that dissolves in a liquid medium under controlled conditions.
This test is necessary because the drug’s ability to dissolve in the stomach or intestinal fluids affects its bioavailability.
Bioavailability refers to the amount of drug that reaches the bloodstream and produces a therapeutic effect.
If a drug does not dissolve, it cannot be absorbed by the body, and its effectiveness is reduced. Therefore, the dissolution test is an essential quality control measure to ensure that the drug is of high quality.
The dissolution test is performed using a dissolution apparatus, which consists of a paddle or basket apparatus and a glass vessel.
The paddle or basket is rotated at a constant speed in the liquid medium, and the amount of drug that dissolves is measured at specific time intervals.
The time it takes for the drug to dissolve should be within the range specified in the in the Indian Pharmacopoeia (IP), British Pharmacopoeia (BP), United State Pharmacopoeia (USP), etc., against the monographs of the particular dosage form.
Also read related articles:
IPC includes dissolution test in IP: Read details
IPC to include Dissolution Test in prolonged-release formulations in IP
Disintegration VS Dissolution
Table comparing disintegration and dissolution in the pharmaceutical industry:
| Aspect | Disintegration | Dissolution |
|---|---|---|
| Definition | The process by which a solid dosage form breaks apart | The process by which a solid substance dissolves in a liquid medium |
| Purpose | To assess the ability of a dosage form to break down into smaller particles | To evaluate the rate and extent at which a drug substance dissolves |
| Test Method | Disintegration testing using specialized apparatus | Dissolution testing using dissolution apparatus |
| Outcome | Determination of the time required for disintegration | Measurement of drug release from the dosage form |
| Parameters Measured | Disintegration time | Dissolution rate and extent |
| Importance | Ensures that the dosage form disintegrates effectively | Ensures that the drug is released and available for absorption in the body |
| Applicability | Solid dosage forms such as tablets, capsules, and granules | Solid dosage forms, including immediate-release and extended-release formulations |
| Regulatory Standards | Defined by pharmacopoeias such as IP, USP, EP, and JP | Defined by pharmacopoeias such as IP, USP, EP, and JP |
| Significance | Can impact drug absorption and therapeutic effectiveness | Essential for establishing bioequivalence of generic drugs |
| Examples | Tablet breaking down into smaller particles | Active ingredient dissolving to form a solution |
Differences between Disintegration Test and Dissolution Test
While both tests are essential quality control measures in the pharmaceutical industry, there are several differences between them.
Here are some of the key differences between the disintegration test and dissolution test:
1. Purpose
The disintegration test measures the time it takes for a drug to break down into small particles in the stomach or intestinal fluids. The dissolution test measures the amount of drug that dissolves in a liquid medium under controlled conditions.
2. Apparatus
The disintegration test is performed using a disintegration apparatus, which consists of a basket-rack assembly and a glass tube. The dissolution test is performed using a dissolution apparatus, which consists of a paddle or basket apparatus and a glass vessel.
3. Conditions
The disintegration test is performed in simulated gastric or intestinal fluids, whereas the dissolution test is performed in a liquid medium under controlled conditions.
4. Time Frame
The time frame for disintegration test and dissolution test should be within the range specified in the in the Indian Pharmacopoeia (IP), British Pharmacopoeia (BP), United State Pharmacopoeia (USP) etc against the monographs of the particular dosage form.
For example: Unless otherwise stated in the individual monograph, the time frame is as under:
| Type of Tablet | Disintegration Time in IP | Disintegration Time in USP |
| Uncoated | Not more than 15 minutes | Not more than 30 minutes |
| Enteric-coated | Not more than 60 minutes | Not more than 2 hours |
| Buccal | Not more than 30 minutes | Not more than 60 minutes |
| Sublingual | Not more than 3 minutes | Not more than 5 minutes |
5. Results
The disintegration test measures the time it takes for a drug to break down, whereas the dissolution test measures the amount of drug that dissolves.
6. Performance
While the disintegration test and dissolution test are both critical quality control measures, they serve different purposes and are used at different stages of drug development.
The disintegration test is typically performed during the pre-formulation and formulation stages of drug development. During pre-formulation, the disintegration test is used to determine the best form of the drug to be developed, while during formulation, the test is used to optimize the dosage form.
On the other hand, the dissolution test is typically performed during the development of the drug product. This test is used to ensure that the drug product meets the regulatory standards for bioavailability and that the amount of drug that is released is consistent over time.
Important
It is important to note that the results of the disintegration test and dissolution test can be affected by various factors such as the temperature, pH, and composition of the simulated fluids used in the tests.
Therefore, it is essential to conduct these tests under standardized and controlled conditions to ensure accurate and reproducible results.
Conclusion:
The disintegration test and dissolution test are two critical quality control measures used in the pharmaceutical industry to ensure that drugs are of high quality and meet regulatory standards.
These tests serve different purposes and are used at different stages of drug development. While the tests may have some similarities, they differ in their apparatus, conditions, time frame, and results.
Procedure to obtain License to Manufacture drugs for testing and analysis purposes
Procedure to obtain license for Commercial Testing Laboratories
Latest Notifications: Testing Laboratories
Commercial Testing Laboratories
Commercial Testing Laboratories: Procedure
Updated list of Medical Device Testing Laboratories (MDTLs)
List of Laboratory Instruments for Pharma & Cosmetics Industry
How to prepare SOPs in the Pharma Industry
Difference between branded and generic medicines
Understanding DQ, IQ, PQ, and OQ in the Pharma Industry
Duties and responsibilities of QA person in Pharma Industry
Types of Tablet Coating and its Functionality in pharma industry
Dissolution test: Importance in Pharma Industry
Lux level in Industry (Pharma, Cosmetics, Homeopathy & Medical Devices)
NSQ Drug: Route cause analysis and CAPA
Area required for manufacturing of Drugs, Cosmetics, Homoeopathic & Blood Centre
BA / BE Studies: Bioavailability & Bioequivalence
For informative videos by The Health Master, click on the below YouTube icon:
For informative videos on Medical Store / Pharmacy, click on the below YouTube icon:
For informative videos on the news regarding Pharma / Medical Devices / Cosmetics / Homoeopathy etc., click on the below YouTube icon:
For informative videos on consumer awareness, click on the below YouTube icon:
